Doors & Locks

Allows you to configure the settings of the horn signal when lock/unlock the doors.

Allows you to configure Flash Lamps on Lock.

Allows you to configure Illuminated Approach Time.

This routine allows you to change a door module settings, such as exterior mirrors extra features, Courtesy Lamps, Approach Lights.

This procedure allows you to add/remove the Power Liftgate (sales code JRC) to the current vehicle configuration. It is required to install/remove the appropriate components included in the Power Liftgate kit.

Allows you to activate or deactivate of automatic door locking and unlocking. This settings are hidden in european vehicles.

This function will calibrate the full open and full closed positions on the power liftgate. When starting this procedure, liftgate should be completely closed. The Liftgate will open and close automatically, there should be space around the vehicle.

This function allows you to verify proper connection between PEM and Door Handles. Ignition Switch should be in the RUN Position.

This routine allows you to calibrate the Liftgate Full Close Position. The Liftgate must be in the Full Open Position before running this routine!

This routine allows you to calibrate the Liftgate Full Open Position. The Liftgate must be in the Full Closed Position before running this routine!

This routine allows you to learn the Latch Home Sector. A sector gear will be moved to find the correct position. This routine should be performed if the liftgate will not open: - ECU chimes when requested to open - there are active DTCs related to sector switch - the sector switch is closed

This routine allows you to change PLGM Configuration parameters: Rear Zone Switch, Ramp Van Feature, Passive Entry Capable.

This routine allows you to cinch the latch of the Left Sliding Door. The Doors must be in the Full Open Position before running this routine! After performing the Latch Cinch Test, the Latch Release Test must be performed to operate the door normally!

This routine allows you to release the latch of the Left Sliding Door. The Doors must be unlocked before running this routine!

This routine allows you to learn the Latch Home Sector. A sector gear will be moved to find the correct position. This routine should be performed if the door will not open: - ECU chimes when requested to open - there are active DTCs related to sector switch - the sector switch is closed

This routine allows you to cinch the latch of the Right Sliding Door. The Doors must be in the Full Open Position before running this routine! After performing the Latch Cinch Test, the Latch Release Test must be performed to operate the door normally!

This routine allows you to release the latch of the Right Sliding Door. The Doors must be unlocked before running this routine!

This routine allows you to learn the Latch Home Sector. A sector gear will be moved to find the correct position. This routine should be performed if the door will not open: - ECU chimes when requested to open - there are active DTCs related to sector switch - the sector switch is closed

This routine allows you to calibrate the Left Power Sliding Door Full Close Position. The Doors must be in the Full Open Position before running this routine!

This routine allows you to calibrate the Left Power Sliding Door Full Open Position. The Doors must be in the Full Close Position before running this routine!

This routine allows you to calibrate the Right Power Sliding Door Full Close Position. The Doors must be in the Full Open Position before running this routine!

This routine allows you to calibrate the Right Power Sliding Door Full Open Position. The Doors must be in the Full Close Position before running this routine!