TPMS & Tires
19 procedures available
TPMS - Tire Pressure Monitoring System
Allows you to disable or enable the TPMS system for tire pressure measurement, and to switch between TPMS Base and Premium.
TPMS Base does not have wheel location capability, displays only low pressure warning.
TPMS Premium locates pressure sensors and displays graphically information about the air pressure on each tire.
To activate of the premium system on some vehicles may require the installation of additional signal receivers near wheels or an additional TPM module.
In some countries TPMS is required on public roads. In this case, after TPMS deactivation, you can only move outside public roads.
Tire size - typing Tire Circumference
Allows you to set Tire size - typing Tire Circumference (not Tire Diameter).
CAUTION! If the vehicle is equipped with a NAG1 (722.6) automatic transmission, it is mandatory to perform the Initialize EGS (Diagnostic tab - TCM - Routines) procedure for the TCM control unit to learn the new settings after changing the tire circumference settings.
The usage of this routine is at your own risk!
TPM Module - Program TPMS Sensor 1 ID (Left Front)
This function allows you to write the TPMS Sensor 1 ID (Left Front).
TPM Module - Program TPMS Sensor 2 ID (Right Front)
This function allows you to write the TPMS Sensor 2 ID (Right Front).
TPM Module - Program TPMS Sensor 3 ID (Right Rear)
This function allows you to write the TPMS Sensor 3 ID (Right Rear).
TPM Module - Program TPMS Sensor 4 ID (Left Rear)
This function allows you to write the TPMS Sensor 4 ID (Left Rear).
TPM Module - Program TPMS Sensor 5 ID (Spare)
This function allows you to write the TPMS Sensor 5 ID (Spare).
Tire Pressure Monitor Sensors Rolls Test
This routine will verify communication between TPM sensors and RF-HUB module. It should be run when new tire sensors are programmed.
Vehicle speed must be above 20 MPH for at least 30 seconds after the routine start.
TPMS - Program TPMS Sensor 1 ID (Left Front)
This function allows you to write the TPMS Sensor 1 ID (Left Front).
TPMS - Program TPMS Sensor 2 ID (Right Front)
This function allows you to write the TPMS Sensor 2 ID (Right Front).
TPMS - Program TPMS Sensor 3 ID (Right Rear)
This function allows you to write the TPMS Sensor 3 ID (Right Rear).
TPMS - Program TPMS Sensor 4 ID (Left Rear)
This function allows you to write the TPMS Sensor 4 ID (Left Rear).
TPMS - Program TPMS Sensor 5 ID (Spare Tire)
This function allows you to write the TPMS Sensor 5 ID (Spare Tire).
Clear TPM Sensor Rolls Test Results
This routine will clear the TPM Sensor Rolls Test Results. Ignition should be in Run.
WCM Module - Program TPMS Sensor 1 ID (Left Front)
This function allows you to write the TPMS Sensor 1 ID (Left Front).
WCM Module - Program TPMS Sensor 2 ID (Right Front)
This function allows you to write the TPMS Sensor 2 ID (Right Front).
WCM Module - Program TPMS Sensor 3 ID (Right Rear)
This function allows you to write the TPMS Sensor 3 ID (Right Rear).
WCM Module - Program TPMS Sensor 4 ID (Left Rear)
This function allows you to write the TPMS Sensor 4 ID (Left Rear).
WCM Module - Program TPMS Sensor 5 ID (Spare)
This function allows you to write the TPMS Sensor 5 ID (Spare).
Perform These Procedures with OBDify App
Download OBDify Car Diagnostic to access all tpms & tires procedures
Coming Soon
