Stability Control

Allows you to set Axle Ratio. CAUTION! If the vehicle is equipped with a NAG1 (722.6) automatic transmission, it is mandatory to perform the Initialize EGS (Diagnostic tab - TCM - Routines) procedure for the TCM control unit to learn the new settings after changing the Axle Ratio settings. The usage of this routine is at your own risk!

This routine will reset the PTU Shift Counter. This should be run after ECU or component replacement.

This routine will reset the RDM Shift Counter. This should be run after ECU or component replacement.

This routine perform the ELSD Quick Learn Procedure. This procedure should be use after ELSD component replacement. Refer to the Factory Service Manual for the details.

This routine will test the ELSD system for proper functionality. When test has completed, check for DTCs. This process will take 60 seconds. Refer to the Factory Service Manual for the details.

This routine will Clear Transfer Case Adaptives.