Doors & Locks
22 procedures in this system.
-
Calibrate Liftgate
This function will calibrate the full open and full closed positions on the power liftgate. When starting this procedure,…
-
Close Door Position Calibration - Left Sliding Door
This routine allows you to calibrate the Left Power Sliding Door Full Close Position. The Doors must be in the Full Open…
-
Close Door Position Calibration - Right Sliding Door
This routine allows you to calibrate the Right Power Sliding Door Full Close Position. The Doors must be in the Full Open…
-
Door Handle Verification Test
This function allows you to verify proper connection between PEM and Door Handles. Ignition Switch should be in the RUN Position.
-
Door Lock/Unlock Settings
Allows you to activate or deactivate of automatic door locking and unlocking. This settings are hidden in european vehicles.
-
Door Module and Mirror Settings
This routine allows you to change a door module settings, such as exterior mirrors extra features, Courtesy Lamps, Approach…
-
Flash Lamps on Lock Settings
Allows you to configure Flash Lamps on Lock.
-
Horn Chirp on Lock/Unlock Settings
Allows you to configure the settings of the horn signal when lock/unlock the doors.
-
Illuminated Approach Time
Allows you to configure Illuminated Approach Time.
-
Latch Cinch Test - Left Sliding Door
This routine allows you to cinch the latch of the Left Sliding Door. The Doors must be in the Full Open Position before running…
-
Latch Cinch Test - Right Sliding Door
This routine allows you to cinch the latch of the Right Sliding Door. The Doors must be in the Full Open Position before running…
-
Latch Home Sector Test
This routine allows you to learn the Latch Home Sector. A sector gear will be moved to find the correct position. This routine…
-
Latch Home Sector Test - Left Sliding Door
This routine allows you to learn the Latch Home Sector. A sector gear will be moved to find the correct position. This routine…
-
Latch Home Sector Test - Right Sliding Door
This routine allows you to learn the Latch Home Sector. A sector gear will be moved to find the correct position. This routine…
-
Latch Release Test - Left Sliding Door
This routine allows you to release the latch of the Left Sliding Door. The Doors must be unlocked before running this routine!
-
Latch Release Test - Right Sliding Door
This routine allows you to release the latch of the Right Sliding Door. The Doors must be unlocked before running this routine!
-
Liftgate Full Close Position Calibration
This routine allows you to calibrate the Liftgate Full Close Position. The Liftgate must be in the Full Open Position before…
-
Liftgate Full Open Position Calibration
This routine allows you to calibrate the Liftgate Full Open Position. The Liftgate must be in the Full Closed Position before…
-
Open Door Position Calibration - Left Sliding Door
This routine allows you to calibrate the Left Power Sliding Door Full Open Position. The Doors must be in the Full Close…
-
Open Door Position Calibration - Right Sliding Door
This routine allows you to calibrate the Right Power Sliding Door Full Open Position. The Doors must be in the Full Close…
-
PLGM Configuration
This routine allows you to change PLGM Configuration parameters: Rear Zone Switch, Ramp Van Feature, Passive Entry Capable.
-
Power Liftgate (JRC)
This procedure allows you to add/remove the Power Liftgate (sales code JRC) to the current vehicle configuration. It is required…
