Suspension
8 procedures in this system.
-
Air Suspension Calibration
This routine will set the ride height to uncalibrated Normal Ride Height. Then you will have to enter the real measured…
-
Deflate Spring to Atmosphere
This routine will deflate a selected or all springs to the atmosphere. Refer to the Vehicle Manufacturers Factory Service Manual…
-
Deflate Spring to Reservoir
This routine will deflate a selected spring to the reservoir. Refer to the Vehicle Manufacturers Factory Service Manual for the…
-
Fill Spring from Reservoir
This routine will fill a selected spring from the reservoir. Refer to the Vehicle Manufacturers Factory Service Manual for the…
-
Sway Bar - Jeep Wrangler JK
Allows you to activate or deactivate the Sway Bar module (Jeep Wrangler JK only)
-
System Air Mass Readings
This routine will measure and display the System Air Mass. Refer to the Vehicle Manufacturers Factory Service Manual for the…
-
System Pressure Readings
This routine will measure and display the System Pressures. Refer to the Vehicle Manufacturers Factory Service Manual for the…
-
System Status Reading
This routine will measure and display the values of the most important system parameters, like Air Mass, Pressure and Ride…
