Procedures
Stability Control
6 procedures in this system.
-
Axle Ratio
Allows you to set Axle Ratio. CAUTION! If the vehicle is equipped with a NAG1 (722.6) automatic transmission, it is mandatory to…
-
ELSD Quicklearn
This routine perform the ELSD Quick Learn Procedure. This procedure should be use after ELSD component replacement. Refer to the…
-
ELSD System Test
This routine will test the ELSD system for proper functionality. When test has completed, check for DTCs. This process will take…
-
Non-Volatile Memory Reset (Clear Transfer Case Adaptives)
This routine will Clear Transfer Case Adaptives.
-
Reset PTU Shift Counter
This routine will reset the PTU Shift Counter. This should be run after ECU or component replacement.
-
Reset RDM Shift Counter
This routine will reset the RDM Shift Counter. This should be run after ECU or component replacement.
