Engine
Manual DPF Regeneration
This function allows you to manually initiate a DPF Regeneration.
1. The regeneration process can take up to 30 minutes.
2. To stop the regeneration process turn off the engine or press accelerator or brake pedal.
3. When the regeneration procedure begins, the engine speed will increase to 1500 rpm and the exhaust gas will be at a high temperature.
4. The fuel level must be above 1/4 of tank.
5. After the regeneration process, engine oil change is recommended. The usage of this routine is at your own risk! Click Next to Continue.
1. The regeneration process can take up to 30 minutes.
2. To stop the regeneration process turn off the engine or press accelerator or brake pedal.
3. When the regeneration procedure begins, the engine speed will increase to 1500 rpm and the exhaust gas will be at a high temperature.
4. The fuel level must be above 1/4 of tank.
5. After the regeneration process, engine oil change is recommended. The usage of this routine is at your own risk! Click Next to Continue.
Systems: Engine
Run this on your car with OBDify
Check if your car is supported — free — then run guided procedures from your phone. iPhone or Android.
