Transmission
10 procedures in this system.
-
62TE Transmission - Quick Learn
This Function perform the Transmission Quick Learn Procedure. For 62TE Transmission only. Before using refer to the vehicle…
-
Clear Learned VLP Counters #1
This Function clear the Variable Line Pressure (VLP) Counters - Shift Count In Open Loop Register.
-
Clear Learned VLP Counters #2
This Function clear the Variable Line Pressure (VLP) Counters - Open Loop Output Tooth Count Register.
-
CVT Initialization
This routine is used when the CVT controller has been replaced or needs to be re-initialized. This procedure will program a new…
-
Edit EGS Variant Coding Data
This function allows you to manually edit EGS Variant Coding Data. It will read the current Variant Coding Data, allows you to…
-
Initialize EGS
This function should be used only when the EGS TCM has been replaced or needs to be re-initialized. It will write the current…
-
Reset Learned Adaptives
This routine should be used when the transmission or any of its components have been replaced. All the learned shift adaptives…
-
Store Learned Adaptives
This function should be used to store any changes to the learned adaptives, during the Drive Test.
-
ZF 8 Speed Transmission - Quick Learn
This procedure will perform an adaption of the clutches. Parking brake must be set, brake pedal pressed, and transmission oil…
-
ZF 9 Speed Transmission - Quick Learn
This procedure will perform an adaption of the clutches. Parking brake must be set, brake pedal pressed, and transmission oil…
